by Marian | 8. Sep 2023 | Operating manuals
The DIY Filament Box is an individually planned box for storing filament spools to protect them from dust and moisture. Thanks to the filament feedthroughs, fialment can be printed straight out of the box. The filament spools are rotatably mounted and filament can be...
by Marian | 6. Sep 2023 | Operating manuals
The silica gel box is made to hold loose silica gel (desiccant) granules and to be fixed in a filament box. When planning the installation and during operation, it is important to ensure that the silica gel box does not prevent or even block the rotation of the...
by Marian | 10. Nov 2022 | Operating manuals
The DIY 3D printer damper board is a customizable dampening pad for different types of open FDM / FFF 3D printers. The project is only intended to decouple FDM / FFF 3D printers for home use or desktop 3D printers from the desk or shelf beneath and must not be...
by Marian | 30. Jun 2022 | Operating manuals
The DIY 3D printer enclosure is an individually designable enclosure for different types of open FDM / FFF 3D printers. When planning, the required space, including all necessary distances and additional security to the walls, must be considered. For operation, a 3D...
