Flat Preloader Icon

3D Print Models

Subscribe to the email list and get 3D Print Files for 0 EUR

Grab your 3D Print Files for 0 EUR

Title picture 3D printed desiccant box with the fastening clip, screws and the Box L filled with loose silica gel granules and half-open lid, next to it the box S without granules but with the closed lid.

Addon for the ANYBOX – Silica Gel Box

If you’re looking to use loose silica gel in your filament dry box, this project provides a fully 3D printable box for your desiccant. It features a simple clip mechanism, making it easy to install in your filament box and swap out whenever needed.

You can find the instructions right here: DIY silica gel box.

To the 3D Print Files
Shows all included 3D printing files, STL templates from testers, and benchmarks for 3D printed joints using the Printfit system.

The PrintFit System

There’s nothing more frustrating than when, after hours of printing, two 3D printed parts don’t fit together, or a purchased component doesn’t fit into the 3D printed part. But now, there’s a solution for exactly these problems:

➔ the PrintFit System

Here you’ll find the overview and guide to the PrintFit System

To the 3D Print Files
Here's a screenshot of the Excel file for calculating the wood and plexiglass panels you'll need to build your 3D printer enclosure.

3D Printer Enclosure – Excel Spreadsheet for Panel Calculations

This 3D printer enclosure is fully customizable to fit your specific 3D printer. To calculate the required panel dimensions, you can download an Excel calculation sheet here.

You can find the instructions for building the 3D printer enclosure here: DIY 3D printer enclosure

Download the Excel file