Flat Preloader Icon
Rendered product image of the 3D printer enclosure with the door closed
Rendering of all included 3D print files for the DIY 3D printer enclosure to build yourself
Advantages of the 3D printer enclosure are less noise, less smell, dust-free 3D printer and less warping
Rendering of the 3D printer enclosure large for Prusa i3 MK3 with filament inside, medium for Prusa i3 MK3 filament feed from outside and 3D printer box small for Prusa MINI with filament feed from outside
Build a DIY 3D printer housing and feed filament from above
DIY 3D Printer enclosure build it yourself and connect the filament dry box
DIY 3D Printer enclosure build it yourself and connect the filament dry box for small bowden 3d printer
DIY 3D Printer enclosure with connected filament dry box and open acrylic door Prusa Mini inside
The self-made 3D printer enclosure with attached DIY filament drying box
DIY 3D Printer enclosure with connected filament dry box and open acrylic door Prusa MK3 inside
The filament spool is placed on the spool holder on the 3D printer enclosure, with the filament being fed into the box using variant A
3D printing filament supply tube coupling that connects 2 tubes that lead to the 3D printer enclosure
Connect the PTFE supplying tube with filament to the 3D printing filament feedthrough of the enclosure
PTFE tube with filament before connecting to the 3D printed tube connector
Filament runs in the 3D printer box parallel to the top panel from the filament passage to the deflection pulley and is redirected there to the 3D printer below
Collage of different filament feedthroughs and 3D printing parts of the filament system
Collage of the cable entry into the 3D printer housing
collage of the magnet lock and hinges of the door of the DIY 3D printer box
Required 3D printing parts bracket 2-sided and bracket 3-sided
3D printed hinges and 3D printed magnet lock on a 3D printer build plate
3D printed handle for the DIY 3D printer enclosure on the build plate of a 3D printer
3D printing of cable entry box and inserts for round cables and without passage on a heat bed
Four flexible supporting feet for the 3D printer box on a printing plate
Two 3D printed tube clamps on a 3D printer build plate
3D printed components filament inlet tube connector and inlet nut
3D printing parts feedthrough inlet tube connector and tube clamp with thread for the filament feedthrough in the 3D printer enclosure
3D print part pulley holder for the filament deflection roller in the DIY 3D printer enclosure
The 3D printed parts split screw and pulley on a 3D printer building plate
Required 3D printed part for coupling two PTFE supply tubes
3D printed part bore cover on a 3D printer spring steel build plate
Required 3D printed parts: marker and stencil templates for cable entry box and supporting feet

3D Print Files – DIY 3D Printer Enclosure

48,90 € incl. VAT

Get the 3D print files for the customizable 3D printer enclosure with tons of accessories now. With almost 100 high-resolution STL files included, you can print out all the 3D printing parts you need to build the DIY enclosure yourself. The files are optimized for FDM / FFF 3D printing and can be printed without support structures. The housing helps you to reduce the noise and smell of your 3D printer. Due to the sealed box, the guide rails of the 3D printer always remain dust-free. The stabilized and slightly higher temperature in the 3D printer enclosure will help you printing technical filaments such as ABS or HIPS, which tend to warp.

You can design the 3D printer enclosure precisely to your planned 3D printer setup. Simply enter the required dimensions in the included Excel calculation sheet and you will receive all the dimensions for cutting the required panels. You can either place the filament for the printer in the enclosure or feed it from the outside. Via several implementation variants either from a spool holder or with a pluggable PTFE supply tube, for example directly from your filament drying box.

Category:

This product is a digital product, you will receive the 3D print model files. After purchasing and paying, you will receive a download link to the files via email. The 3D print templates come as high-resolution STL files in a ZIP folder. The assembly instructions can be found here: DIY 3D printer enclosure

Special extra: The 3D print files of the depth caliper are already included in the 3D printed templates for the 3D printer enlcosure.

All models are optimized for FDM / FFF 3D printers and do not require any support structures when printing.

Please note that in addition to the 3D print files, purchased parts are also required. You find a list of all required purchased parts in the bill of materials of the DIY 3D printer enclosure.

Safety first! Read and observe the assembly safety guidelines of the enclosure and the operating manual of the DIY 3D printer enclosure, especially the safety guidelines contained therein for operation.

The purchase includes the following STL files in the highest resolution:

  • 002300_Pulley
  • 002400_Screw
  • 002900_Bracket_3-sided
  • 003000_Bracket_2-sided
  • 003100_Handle
  • 003200_Hinge_Part_1
  • 003300_Hinge_Part_2
  • 003400_Magnetic_Lock_Screw_Holder
  • 003500_Magnetic_Lock_Magnet_Holder
  • 003600_Magnetic_Lock_Cap
  • 003700_Supporting_Foot
  • 003800_Cable_Entry_Box
  • 003900_Cable_Entry_Insert_closed
  • 004000_Cable_Entry_Insert_Bore_D##
    9 models with bore diameters D= 3, 4, 5, 6, 7, 8, 9, 10, 11 mm
  • 004100_Cable_Entry_Insert_Rectangular_W#_L##
    42 models of all combinations of rectangular slots with width W= 2, 3, 4, 5, 6, 7 mm and length L= 4, 5, 6, 7, 8, 9, 10 mm
  • 004200_Pulley_Holder_A##
    6 models with distances A= 10, 20, 30, 40, 50, 60 mm
  • 004300_Inlet_Tube_Connector_OD#_L##
    10 models of all combinations of attachable PTFE tube diameter outside OD= 4, 5 mm and length of the carrying-through L= 20, 25, 30, 35, 40 mm
  • 004400_Inlet_Nut
  • 004500_Bore_Cover
  • 004600_Tube_Clamp_OD4
  • 004600_Tube_Clamp_OD5
  • 004700_Tube_Clamp_with_Thread_OD4
  • 004700_Tube_Clamp_with_Thread_OD5
  • 004800_Tube_Coupling_OD4
  • 004800_Tube_Coupling_OD5
  • 004900_Marker
  • 005000_Stencil_Cable_Entry_Box
  • 005100_Stencil_Stand
  • 005400_Ruler
  • 005500_Lock_Left
  • 005600_Lock_Right
  • 000400_Tool_Bearing_Press_In
  • 000500_Tool_Bearing_Press_Out
  • 000600_Tool_Bearing_Press_Counter

Do you like the project? Support 3d-print-files.com and share pictures in your social media channels. Also send me photos of your finished project to support@3d-druck-vorlagen.de for publication here in the product gallery.

The files are intended for private use only, commercial use (sale of the printed parts) and distribution of the files is not permitted, see the Terms and Conditions for more information. If you want to sell printed parts commercially, contact me by email for a license.

With the download link received, the files can be downloaded a maximum of 5 times.

If you have any questions about the product, please send me an email to support@3d-druck-vorlagen.de.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Do you have any questions about the 3D printing projects or need help with printing or assembling? Just send me an email to support@3d-druck-beispiele.de or call me at +43 677 634 867 33.